Condition
| Possible Cause
| Correction
|
Horizontal Operation of Seat
Not Smooth but Jerky-Apparent Hard Operation
| The adjuster horizontal actuator is damaged.
| Replace the
adjuster assembly.
|
Horizontal Chuck or Looseness
|
| • | The horizontal actuator is improperly adjusted to the rack. |
| • | The top plate subassembly is loose. |
|
| • | Replace the adjuster assembly. |
| • | Replace the adjuster assembly. |
|
One Adjuster Will
Not Operate Horizontally
|
| • | The horizontal drive cable is disconnected or damaged. |
| • | The horizontal actuator is inoperative. |
|
| • | Inspect the drive cables, they must be stright to be engaged.
Replace if damaged. |
| • | Replace the adjuster assembly. |
|
One Adjuster Will
not Operate Vertically
|
| • | The vertical drive cable is disconnected or damaged. |
| • | The vertical actuator subassembly is inoperative. |
|
| • | Inspect the vertical drive cables, replace if damaged. |
| • | Replace the adjuster assembly. |
|
Both Adjusters Will
Not Operate Horizontally and/or Vertically
|
| • | The motor is damaged or inoperative. |
| • | The wiring harness is damaged. |
|
| • | Replace the adjuster assembly |
| • | Replace the wiring harness. |
|
Vertical Chuck or
Looseness
| The vertical actuator is inoperative.
| Replace the adjuster assembly.
|
