LACK OF TEMPERATURE OR BLOWER/ MAY BE PINCHED ASPIRATOR HOSE

SUBJECT: LACK OF TEMPERATURE AND BLOWER CONTROL WITH ------- ELECTRONIC CLIMATE CONTROL - C68 SYSTEM

MODELS AFFECTED: 1988 LESABRES ---------------

CONDITION

Lack of temperature and blower control in automatic mode and system not responding to actual in-car temperature.

CAUSE

In-car temperature sensor aspirator hose pinched or disconnected.

This condition may be confirmed by covering the in-car sensor opening with a piece of tissue paper. When the hose is properly connected, at high blower speed, the paper will be sucked over the opening and if the hose is pinched or disconnected the paper will just loosely sit or slide off the opening.

CORRECTION

Check the aspirator for proper installation. Check if the aspirator hose is connected on both ends and that the aspirator hose is not pinched or collapsed after the assembly is completed.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.