SERVICE MANUAL REVISION ROOF SCALP MOLDING REPAIR

REVISION TO S/M REPLACEMENT PROCEDURE OF COMBINATION WINDSHIELD AND ROOF SCALP (DRIP) MOULDING RETAINER

VEHICLES AFFECTED: 1986-88 DELTA 88 COUPES -----------------

This bulletin is being revised to indicate the service procedure in the Service Manual is correct. This bulletin supersedes P.S.B. 88-2-162.

* Use the body service manual procedures as described in Section 2-10 of the 1988 Body Service Manual when replacing the roof scalp moulding retainer.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.