METALLIC RATTLE REAR OF VEH. INSTALL NEW HEAT SHIELD BUMPER

SUBJECT: METALLIC RATTLE AT REAR OF VEHICLE (INSTALL NEW HEAT SHIELD BUMPER)

VEHICLES AFFECTED: 1992 "H" MODELS

CONDITION:

---------- Owners of some 1992 "H" models may comment that they hear a metallic rattle at the rear of the vehicle when the deck lid is closed.

CORRECTION:

----------- A new heat shield bumper has been released for service. (Part No. #25610777)

PROCEDURE:

---------- 1. Attach the rubber bumpers between the heat shield and the underbody at the locations shown in Figure 1.

2. Pulling down on the rear of the heat shield will provide enough clearance to adhere the bumpers to the floor pan. Check to be sure the shield contacts the bumpers when the shield is released.

WARRANTY INFORMATION:

For vehicles repaired under warranty use:

Labour Time: .2 hr.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.