For 1990-2009 cars only
Removal Procedure
- Raise the vehicle. Support the vehicle. Refer to General Information.
- Remove the converter cover bolts.
- Remove the converter cover.
Installation Procedure
- Install the converter cover.
- Install the converter cover attaching bolts.
- Lower the vehicle.
Tighten
Tighten the bolts to 13 N·m (115 lb in).
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
