SMU-SEC. 8A-202-17 REV. LAMP CONTROL MODULE

SUBJECT: SERVICE MANUAL UPDATE - SECTION 8A-202-17 - REVISED LAMP CONTROL MODULE CONNECTOR END VIEW PINOUT TABLE

MODELS: 1997 BUICK LESABRE

THIS BULLETIN IS BEING ISSUED TO REVISE THE LAMP CONTROL MODULE CONNECTOR END VIEW PINOUT TABLE ON PAGE 8A-202-17 OF THE SERVICE MANUAL.

PLEASE REPLACE THE CURRENT PAGE WITH THE ATTACHED REVISED TABLE.

FIGURES: 00 ATTACHMENTS: 01

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.

COPYRIGHT 1997 GENERAL MOTORS CORPORATION. ALL RIGHTS RESERVED.