GAP FIT BETWEEN PASS. SIR MODULE AND THE INSTR.. Buick LeSabre 1997

SUBJECT: GAP FIT BETWEEN PASSENGER SIR MODULE AND THE INSTRUMENT PANEL TRIM PLATE (REMOVE AND REINSTALL PSIR MODULE)

MODELS: 1994-98 BUICK LESABRE

CONDITION:

SOME CUSTOMERS MAY COMMENT ABOUT ON A GAP BETWEEN THE PASSENGER SUPPLEMENTAL INFLATABLE RESTRAINT (PSIR) MODULE AND THE INSTRUMENT PANEL TRIM PLATE.

CORRECTION:

REMOVE THE PSIR MODULE, THEN REINSTALL. FOLLOW THE PROCEDURE DESCRIBED IN SECTION 9J OF THE APPROPRIATE SERVICE MANUAL. WHEN INSTALLING THE PSIR MODULE, MAKE SURE IT IS PROPERLY LOCATED. FIRST INSTALL THE TOP TWO FASTENERS, THEN THE BOTTOM TWO FASTENERS. IT IS NECESSARY TO DO THIS IN ORDER TO PROPERLY LOCATE THE PSIR MODULE. WHEN INSTALLING THE TRIM PLATE, PUSH IN BOTH SIDES AT THE SAME TIME. IF ONE SIDE IS PRESSED IN FIRST, IT WILL RESULT IN A GAP BETWEEN THE PSIR MODULE AND THE TRIM PLATE.

IMPORTANT:

DO NOT ATTEMPT TO REPAIR THE PSIR MODULE. THIS MODULE IS SERVICED BY REPLACEMENT ONLY.

WARRANTY INFORMATION:

FOR VEHICLES REPAIRED UNDER WARRANTY, USE:

LABOR OPERATION LABOR OPERATION NUMBER DESCRIPTION TIME --------------- ----------- ---------------

C8836 MODULE - PASSENGER INFLATABLE 0.7 HR CUSHION (SIR SYSTEM) - R+R OR REPLACE

ADD: FOR DIAGNOSTIC TIME 0.0 - 0.3 HR

FIGURES: 00

ATTACHMENTS: 00

GENERAL MOTORS BULLETINS ARE INTENDED FOR USE BY PROFESSIONAL TECHNICIANS, NOT A "DO-IT-YOURSELFER". THEY ARE WRITTEN TO INFORM THOSE TECHNICIANS OF CONDITIONS THAT MAY OCCUR ON SOME VEHICLES, OR TO PROVIDE INFORMATION THAT COULD ASSIST IN THE PROPER SERVICE OF A VEHICLE. PROPERLY TRAINED TECHNICIANS HAVE THE EQUIPMENT, TOOLS, SAFETY INSTRUCTIONS AND KNOW-HOW TO DO A JOB PROPERLY AND SAFELY. IF A CONDITION IS DESCRIBED, DO NOT ASSUME THAT THE BULLETIN APPLIES TO YOUR VEHICLE, OR THAT YOUR VEHICLE WILL HAVE THAT CONDITION. SEE A GENERAL MOTORS DEALER SERVICING YOUR BRAND OF GENERAL MOTORS VEHICLE FOR INFORMATION ON WHETHER YOUR VEHICLE MAY BENEFIT FROM THE INFORMATION.