Step | Action | Value(s) | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you perform the Instrument Cluster System Check? | -- | Go to Step 2 | |||||||||
2 |
Does the DIC DOOR AJAR indicator light? | -- | Go to Step 4 | Go to Step 3 | ||||||||
3 | Inspect CKT 745 (GRY/BLK) for an open, from the instrument cluster to the door jamb switch connector. Refer to Instrument Cluster: Analog Schematics . Is CKT 745 OK? | -- | Go to Step 9 | Go to Step 8 | ||||||||
4 | Connect a fused jumper between the door jamb switch connector terminals. Does the DOOR AJAR indicator light? | -- | Go to Step 6 | Go to Step 5 | ||||||||
5 | Inspect CKT 1250 (BLK) for an open. Was a problem found in CKT 1250? | -- | Go to Step 7 | |||||||||
6 | Replace the suspect door jamb switch. Refer to Instrument Cluster: Analog Schematics . Did you complete the repair? | -- | -- | |||||||||
7 | Repair the open in CKT 1250 (BLK). Refer to Repairing Damaged Wire Insulation in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
8 | Repair the open in CKT 745 (GRY/BLK) from the instrument cluster to the door jamb switch connector. Refer to Repairing Damaged Wire Insulation in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
9 | Inspect CKT 746 (BLK/WHT) from the instrument cluster to the door jamb switch connector. Refer to Instrument Cluster: Analog Schematics . Was a problem found in CKT 746? | -- | Go to Step 11 | Go to Step 10 | ||||||||
10 | Repair the open in CKT 746 (BLK/WHT) from the instrument cluster to the door jamb switch connector. Refer to Repairing Damaged Wire Insulation in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
11 | Inspect CKT 747 (LT BLU/BLK) from the instrument cluster to the door jamb switch connector. Refer to Instrument Cluster: Analog Schematics . Was a problem found in CKT 747? | -- | Go to Step 12 | Go to Step 13 | ||||||||
12 | Repair the open in CKT 747 (LT BLU/BLK) from the instrument cluster to the door jamb switch connector. Refer to Repairing Damaged Wire Insulation in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
13 | Inspect CKT 748 (LT GRN/BLK) from the instrument cluster to the door jamb switch connector. Refer to Instrument Cluster: Analog Schematics . Was a problem found in CKT 748? | -- | Go to Step 14 | Go to Step 15 | ||||||||
14 | Repair the open in CKT 748 (LT GRN/BLK) from the instrument cluster to the door jamb switch connector. Refer to Repairing Damaged Wire Insulation in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
15 | Inspect the following in-line connectors for proper terminal contact:
Are the connectors properly connected? | -- | Go to Step 17 | Go to Step 16 | ||||||||
16 | Repair any connectors that are not properly connected. Refer to Terminal Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
17 | Inspect the following terminals of connector C200 for proper terminal contact:
Are the connector terminals OK? | -- | Go to Step 19 | Go to Step 18 | ||||||||
18 | Repair the terminal contact. Refer to Terminal Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
19 | Inspect the instrument cluster connector C1 for proper terminal contact. Is connector C1 properly connected? | -- | Go to Step 21 | Go to Step 20 | ||||||||
20 | Repair the instrument cluster connector C1. Refer to Terminal Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |||||||||
21 | Replace the instrument cluster. Refer to IP Cluster Replacement in Instrument Panel, Gauges, and Console. Did you complete the repair? | -- | -- |
