Courtesy Lamps Inoperative Keyless Entry
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Interior Lights System Check? | -- | Go to Step 2 | |
2 |
Is the voltage within the specified range? | 12-14V | Go to Step 3 | Go to Step 10 |
3 |
Is the voltage within the specified range? | 12-14V | Go to Step 4 | Go to Step 11 |
4 | Connect a DMM from the MALL connector C1 cavity G (ORN) to cavity D (BLK). Is the voltage within the specified range? | 12-14V | Go to Step 5 | Go to Step 12 |
5 | Inspect CKT 156 (WHT) for an open between S285 and the MALL. Refer to Testing for Continuity in Wiring Systems. Was an open found? | -- | Go to Step 6 | Go to Step 7 |
6 | Repair the open in CKT 156 (WHT). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
7 | Inspect CKT 1732 (ORN) for an open between S254 and the MALL. Refer to Testing for Continuity in Wiring Systems. Was an open found? | -- | Go to Step 8 | Go to Step 9 |
8 | Repair the open in CKT 1732 (ORN). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
9 | Replace the body control module (MALL). Refer to Body Control Module Replacement in Body Control System. Is the MALL module replacement complete? | -- | -- | |
10 | Repair the open or the short to ground in CKT 640 (ORN). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
11 | Repair the open or short to ground in CKT 39 (PNK). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
12 | Repair the open in CKT 1450 (BLK). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- |
Courtesy Lamps Inoperative Door Hndl Lftd w/o Keyless Ent
Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Interior Lights System Check? | -- | Go to Step 2 | |
2 |
Do all of the courtesy lamps turn on? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the suspect front door handle switch. Is the front door handle switch replacement complete? | -- | -- | |
4 | Inspect CKT 394 (LT GRN/BLK) for an open. Refer to Testing for Continuity in Wiring Systems. Was an open found? | -- | Go to Step 5 | Go to Step 6 |
5 | Repair the open in CKT 394 (LT GRN/BLK). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
6 | Inspect CKT 1250 (BLK/WHT or BLK) for an open. Refer to Testing for Continuity in Wiring Systems. Was an open found? | -- | Go to Step 7 | Go to Step 8 |
7 | Repair the open in CKT 1250 (BLK/WHT or BLK). Refer to Wiring Repairs in Wiring Systems Is the circuit repair complete? | -- | -- | |
8 | Replace the MALL. Refer to Body Control Module Replacement in Body Control System. Is the MALL module replacement complete? | -- | -- |
