GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 LeSabre 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Pop-Up Spring Replacement

Removal Procedure

    Object Number: 306589 Size: SH
  1. Remove the pop-up spring cover.
  2. Remove the bolt (1) retaining the pop-up spring (2).
  3. Remove the pop-up spring (2).

Installation Procedure

    Object Number: 306589 Size: SH
  1. Install the pop-up spring (2).

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the bolt (1) in order to retain the pop-up spring (2).

    3. Tighten
    Tighten the bolt to 9.5 N·m (84 lb in).

  3. Install the pop-up spring cover.