For 1990-2009 cars only
Removal Procedure
- Remove the front bumpers (2) using the following procedure:
- Peel the side bumper (4) from the fender in order to remove the side bumper (4).
- Twist the rear bumper in order to remove from the hood (1).
- Twist the front overslam bumpers (2) in order to remove from the hood (1).
| 1.1. | Peel the bumper (7) from the bumper adjuster (6). |
| 1.2. | Use a flat bladed tool in order to pry the bumper adjuster (6) from the radiator support (5). |
Installation Procedure
- Twist the front overslam bumpers (2) in order to install the bumpers into the hood.
- Use the following procedures in order to install the rear bumper (2) :
- Press the side bumpers (4) to the fender in order to engage.
- Use the following procedure in order to install the front bumpers (6):
Important: Do not use the front overslam bumpers (2) for adjustment.
| 2.1. | Twist the rear bumper (2). |
| 2.2. | Ensure that the rear bumper is 13 mm (½ in) from the hood (1). |
| 4.1. | Press the front bumper (6) into the radiator support (5). |
| 4.2. | Connect the front bumper (7) to the front bumper adjuster (6). |
| 4.3. | Adjust the hood panel. Refer to Hood Adjustment . |
