Front Fender Body Side Molding Replacement Buick

1. Remove the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.



2. Remove the 2 nuts (2).
3. Remove the molding.

1. Install the following components:

•	The molding (3)

•	The 2 nuts (2

2. Install the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.

Front Fender Body Side Molding Replacement 88/LSS

1. Remove the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.



2. Remove the screws (7) that retain the fender molding (6) to the fender.
3. Remove the fender molding (6).

1. Install the fender molding (6).
2. Install the screws (7) in order to retain the fender molding (6) to the fender.
3. Install the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.

Front Fender Body Side Molding Replacement Pontiac

1. Remove the screws (3) at the wheel opening.
2. Remove the front wheelhouse panel. Refer to Wheelhouse Panel Replacement in Body Front End.
3. Remove the fender insulator. Refer to Front Fender Insulator Replacement in Body Front End.
4. Remove the screw that retains the molding to the rocker panel (SSE only).
5. Gently pull the molding in order to disengage the clips.

1. Press the molding in order to engage the clips.
2. Install the nuts to the backside of the fender.
3. Install the fender insulator. Refer to Front Fender Insulator Replacement
4. Install the front wheelhouse panel. Refer to Wheelhouse Panel Replacement
5. Install the screws (3) at the wheel opening.