Rocker Panel Molding Replacement Buick

1. Remove the screws (2).
2. Slide the molding (1) toward the rear of the vehicle in order to disengage the fasteners, if equipped.
3. Remove the rocker panel molding (1).

1. Position the rocker panel molding (1).
2. Secure the molding (1) by striking firmly at each clip location, if equipped.
3. Install the screws (2).

Rocker Panel Molding Replacement Oldsmobile 88/LSS

1. Remove the screws (1,4,5).
2. Slide the molding toward the rear of the vehicle in order to disengage the fasteners, if equipped.
3. Remove the rocker panel molding (2).

1. Position the rocker panel molding (2).
2. Secure the molding, if equipped, by striking firmly at each clip location.
3. Install the screws (1,4,5).

Rocker Panel Molding Replacement Bonneville SSE/SSEi

1. Remove the screws (2,3).
2. Slide the molding toward the rear of vehicle in order to disengage the fasteners, if equipped.
3. Remove the rocker panel molding (1).

1. Position the rocker panel molding (1).
2. Secure the molding by striking firmly at each clip location, if equipped.
3. Install the screws (2,3).

Rocker Panel Molding Replacement Bonneville SE

1. Remove the screws (2).
2. Slide the molding toward the rear of the vehicle in order to disengage fasteners, if equipped.
3. Remove the rocker panel molding (1).

1. Position the rocker panel molding (1).
2. Secure the molding (1) by striking firmly at each clip location, if equipped.
3. Install the screws (2).