For 1990-2009 cars only
- Construct the watertest stand.
- Watertest stand specifications:
- Move both test stands toward the body until you obtain the water spray overlap, if you cannot obtain the water pressure 155 kPa (22 psi), due to a local situation.
| • | The volume of flow -- 14 liters (3.7 gallons) per minute. |
| • | The windshield and front body pillar -- (1) approximately 30 degrees down, 45 degrees toward rear and aimed at the corner of the windshield. |
| • | The doors -- (2) approximately 30 degrees down, 45 degrees towards rear and aimed at the center of rear door or the rear quarter panel. |
| • | The rear wind and the rear compartment lid -- (3) approximately 30 degrees down, 30 degrees toward front and aimed about 600 mm (24 in) from the corner of the rear window. |
