1. Check the drive wheel tires for the following items:

•	Equal tread depth

•

Same size

•

Same make

•	Adjusted to pressure specification

2. Inspect for loose, worn, damaged or incorrect suspension components.
3. Road test the vehicle.

Does the vehicle lead/pull with the transmission in neutral?

--

Go to Step 2

System OK

Refer to Vehicle Leads/Pulls.

Does the vehicle lead/pull under engine torque?

--

Go to Step 3

System OK

1. Swap the front tire and wheel assemblies.
2. Road test the vehicle.

Does the vehicle lead/pull under engine torque?

--

Go to Step 4

System OK

Road test the vehicle.

Is the torque steer in the opposite direction?

--

Go to Step 5

Go to Step 7

1. Swap the left front tire and wheel assembly with the left rear tire and wheel assembly.
2. Road test the vehicle.

Does the vehicle still torque steer?

--

Go to Step 6

Go to Step 7

1. Swap the right front tire and wheel assembly with the right rear tire and wheel assembly.
2. Road test the vehicle.

Does the vehicle still torque steer?

--

Go to Step 7

System OK

1. Position the tire and wheel assemblies to produce minimum torque steer before proceeding.
2. Measure the vehicle's Z heights.

Is the left to right difference more than 6 mm?

--

Go to Step 8

Go to Step 9

1. Correct the Z heights.
2. Reset the camber and toe.
3. Road test the vehicle.

Does the vehicle still torque steer?

--

Go to Step 10

System OK

Measure the vehicle's Z heights.

Is the left to right difference less than 6 mm?

--

Go to Step 10

System OK

Measure the transaxle height.

Is the left to right difference more than 6 mm?

--

Go to Step 11

Go to Step 12

1. Correct the cause for the height difference.
2. Check the engine/transaxle mounts.
3. Road test the vehicle.

Does the vehicle still torque steer?

--

Go to Step 13

Go to Step 14

Measure the transaxle height.

Is the left to right difference less than 6 mm?

--

Go to Step 13

System OK

Align the vehicle to specifications.

Does the vehicle torque steer left?

--

Go to Step 14

Go to Step 16

1. Set the camber -0.5° left and +0.5° right.
2. Road test the vehicle.

Does the vehicle still torque steer left?

--

Go to Step 15

System OK

1. Set the camber -1.0° left and +1.0° right.
2. Road test the vehicle.

Does the vehicle still torque steer left?

--

Go to Step 17

System OK

1. Set the camber +0.5° left and -0.5° right.
2. Road test the vehicle.

Does the vehicle still torque steer right?

--

Go to Step 18

System OK

Set the camber -1.0° left and +1.0° right.

Does the vehicle still torque lead?

--

--

System OK

Set the camber +1.0° left and -1.0° right.

Does the vehicle still torque lead?

--

--

System OK