Transmission Vent Replacement for Buick LeSabre 2000

1. Remove the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.



2. Remove the transaxle vent (press fit) (37) by pulling upward with pliers, gripping the ring edge at transmission surface.

1. Install the transaxle vent (press fit) (37) by tapping gently around ring edge with a drift until vent ring is flush with trasmission case.
2. Install the throttle body air inlet duct. Refer to Air Cleaner Inlet Duct Replacement in Engine Controls.