Tools Required
• | J 42137 Steering
Column Lock Plate Compressor Adapter |
- Install the inner race (4).
- Install the upper bearing inner race seat (3).
- Install the upper bearing spring (2).
- Lubricate the turn signal cancel cam assembly (1) with
lithium grease.
- Install the turn signal cancel cam assembly (1).
- Install the shaft lock
shield assembly.
- Install the new bearing
retainer using J 23653-SIR
and J 42137
.
- Remove J 23653-SIR
and J 42137
from the
steering shaft assembly.
- Install the inflatable restraint steering wheel module coil. Refer
to
Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle
.