Air Distributor Duct Replacement W/O DO7
Removal Procedure
- Remove the left side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel,
Gages and Console.
- Remove the right side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel,
Gages and Console.
Important: Due to the difficulty of the removal of the right side screw (2),
it will not be necessary to install upon reassembly.
- Remove the air distributor duct screws (1,2).
- Remove the air distributor duct.
Installation Procedure
- Install the air distributor duct.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the left side screw (1). Ensure that the right side
tab is seated properly.
Tighten
Tighten the screw to 1.4 N·m (12 lb in).
- Install the left side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel,
Gages and Console.
- Install the right side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel,
Gages and Console.
Air Distributor Duct Replacement With DO7 Rear Air Duct
Removal Procedure
- Remove the left side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel,
Gages and Console.
- Remove the right side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel,
Gages and Console.
- Remove the auxiliary air
distribution duct adapter.
Important: Due to the difficulty of the removal of the right side screw (2),
it will not be necessary to install upon reassembly.
- Remove the air distributor duct screws (1,2).
- Remove the air distribution duct.
Installation Procedure
- Install the air distribution duct
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the left screw (1). Ensure that the right tab is seated
properly.
Tighten
Tighten the screw to 1.4 N·m (12 lb in).
- Install the auxiliary
air distribution duct adapter.
- Install the left side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Left Side
in Instrument Panel,
Gages and Console.
- Install the right side sound insulator. Refer to
Instrument Panel Insulator Panel Replacement - Right Side
in Instrument Panel,
Gages and Console.