Did you perform the HVAC Diagnostic System Check?

Go to Step 2

Go to Diagnostic System Check

1. Install a scan tool.
2. Turn ON the ignition, with the engine OFF.
3. With a scan tool, perform Recalibrate all Motors in instrument panel module Special Function/Miscellaneous Tests.
4. Select display DTC function in instrument panel module.

Does the scan tool display any DTCs?

Go to DTC Table

Go to Step 3

Inspect for a poor battery condition. Refer to Battery Inspection/Test in Engine Electrical.

Did you find and correct the condition?

Go to Step 6

Go to Step 4

Visually inspect the following:

Did you find and correct the condition?

Go to Step 6

Go to Step 5

1. Start the engine.
2. Verify all the instrument panel outlets are open.
3. Operate the system. Refer to the appropriate procedure:

•	Dual Zone Air Conditioning (A/C) System Description

•	Operating Modes

•	Control Assembly Description

•	Control Assembly Description - Passenger

Does the system operate properly?

System OK

Go to Symptoms

Operate the system in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 2