Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 | Test the signal feed circuit of the incandescent lamp(s) for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 5 | Go to Step 3 |
3 | Inspect for poor connections at the connector of the inoperative module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 5 | Go to Step 4 |
4 |
Important:: Preform the setup procedure for the dash integration module when replaced. Replace the inoperative module. Refer to Control Module References in Body Control System. Did you complete the replacement? | -- | Go to Step 5 | -- |
5 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | Go to Step 2 |
