Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 |
Does the test lamp light? | -- | Go to Step 3 | Go to Step 6 |
3 | Connect a test lamp between the signal feed circuit of the rear compartment courtesy lamp bulb and the ground circuit of the rear compartment courtesy lamp. Does the test lamp light? | -- | Go to Step 4 | Go to Step 7 |
4 | Inspect for poor connections at the bulb of the rear compartment courtesy lamp. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 5 |
5 | Replace the rear compartment courtesy lamp bulb. Did you complete the replacement? | -- | Go to Step 10 | -- |
6 | Repair open in the power feed circuit of the rear compartment courtesy lamp. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | -- |
7 | Test the ground circuit of the rear compartment courtesy lamp for a high resistance or an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 8 |
8 | Inspect for poor connections at the connector of the rear compartment lid release actuator. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 10 | Go to Step 9 |
9 | Replace the rear compartment lid release actuator. Refer to Rear Compartment Lid Latch Replacement in Body Rear End. Did you complete the replacement? | -- | Go to Step 10 | -- |
10 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | Go to Step 2 |
