Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | ||
2 | Do the turn lamps flash? | -- | ||
3 |
Does the test lamp illuminate? | -- | ||
4 | Disconnect the turn signal/hazard flasher module. Did the turn signal lamp turn OFF? | -- | ||
5 | Connect a test lamp from the appropriate turn signal input circuit at the turn signal/hazard flasher module to ground. Does the test lamp illuminate? | -- | ||
6 | Inspect for poor connections at the turn signal/hazard flasher module. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
7 | Replace the turn signal/hazard flasher module. Refer to Hazard Lamp Flasher Replacement . Did you complete the replacement? | -- | -- | |
8 | Inspect for poor connections at the turn signal switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | ||
9 | Replace the turn signal switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle in Steering Wheel and Column-Tilt. Did you complete the replacement? | -- | -- | |
10 | Repair the short to battery positive voltage (B+) in the appropriate turn signal input circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
11 | Repair the short to battery positive voltage (B+) in turn signal lamp circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | -- | |
12 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK |
