Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Lighting Systems Diagnostic System Check? | -- | Go to Step 2 | |
2 | Connect a test lamp from the stoplamp/auto trans shift lock control switch power feed circuit to a good ground. Does the test lamp illuminate? | -- | Go to Step 3 | Go to Step 6 |
3 |
Did the test lamp illuminate? | -- | Go to Step 7 | Go to Step 4 |
4 | Inspect for poor connections at the stoplamp/auto trans shift lock control switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 8 | Go to Step 5 |
5 | Replace the stoplamp/auto trans shift lock control switch. Refer to Stop Lamp Switch Replacement in Hydraulic Brakes. Did you complete the replacement? | -- | Go to Step 8 | -- |
6 | Repair the open in the stoplamp/auto trans shift lock control switch power feed circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 8 | -- |
7 | Repair the open in the stoplamp/auto trans shift lock control switch output circuit. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you complete the repair? | -- | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you find and correct the condition? | -- | System OK | Go to Step 2 |
