Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform A Diagnostic System Check - Door Systems? | -- | Go to Step 2 | Go to the Diagnostic System Check - Door Systems |
2 | Does the inside rear view EC mirror operate? | -- | Go to Step 3 | Go to Outside Mirrors Automatic Day-Night Feature Inoperative in Stationary Windows |
3 |
Did you find and correct the concern? | -- | Go to Step 11 | Go to Step 4 |
4 |
Is the voltage within the specified range? | 1.2-1.5 V | Go to Step 5 | Go to Step 6 |
5 |
Is the value equal to or less than specified? | 1 ohms | Go to Step 8 | Go to Step 10 |
6 | Inspect for poor connections at the harness connector of the inside rear view mirror. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 7 |
7 | Replace the inside rear view mirror. Refer to Inside Rearview Mirror Replacement in Stationary Windows. Did you complete the replacement? | -- | Go to Step 11 | -- |
8 | Inspect for poor connections at the harness connector of the DDM. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | -- | Go to Step 11 | Go to Step 9 |
9 | Replace the driver outside rear view mirror. Refer to Power Mirror Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
10 | Replace the DDM. Refer to Door Control Module Replacement . Did you complete the replacement? | -- | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 2 |
