GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

Notice: Use care in removing the fuel injectors in order to prevent damage to the fuel injector electrical connector pins or the fuel injector nozzles. Do not immerse the fuel injector in any type of cleaner. The fuel injector is an electrical component and may be damaged by this cleaning method.

Important: The fuel injector is serviced as a complete assembly only. If the fuel injectors are found to be leaking, the engine oil may be contaminated with fuel. Fuel injector O-rings should always be replaced whenever fuel injectors are serviced.


    Object Number: 537311  Size: SH
  1. Remove the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .
  2. Remove the fuel injector retaining clips (1).
  3. Remove the fuel injectors (3).
  4. Remove the fuel injector upper O-ring (2).
  5. Remove the fuel injector lower O-ring (4).

Installation Procedure

Important: When ordering new fuel injectors, be sure to order the correct injector for the application being serviced.


Object Number: 537308  Size: SH

The fuel injector assembly (1) is stamped with a part number identification (2)


    Object Number: 537311  Size: SH
  1. Coat all new O-rings with engine oil before installing
  2. Install the fuel injector lower O -ring (4).
  3. Install the fuel injector upper O-ring (2).
  4. Install the fuel injector (3) to the fuel rail.
  5. Install the fuel injector retaining clips (1).
  6. Install the fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement .