Removal Procedure
- Raise the vehicle and
support. Refer to
Lifting and Jacking the Vehicle
in General Information.
- Ensure that the park brake is fully released.
- Pull down on the intermediate park brake cable (2) near
the park brake connector (1).
- Disconnect intermediate park brake cable (2) from the park
brake cable connector (1).
- Disconnect the intermediate
cable (3) from the rear equalizer (1).
- Disconnect the intermediate cable (3) from the right rear
park brake cable (5).
- Disconnect the intermediate cable housing from the rear cable
housing retaining bracket.
- Remove the intermediate cable.
Installation Procedure
- Route and install the
intermediate park cable into brake cable retaining brackets.
- Connect the left rear park brake cable (2) to the intermediate
cable (3), using equalizer (1).
- Connect the right (5) rear park brake cable to the intermediate
park brake cable (3).
- Insert the intermediate park brake cable into the cable retaining
bracket.
- Insert the intermediate
park brake cable (2) into the park brake cable connector (1).
- Lower the vehicle. Refer to
Lifting and Jacking the Vehicle
in General Information.