Dash Integration Module Replacement for Buick LeSabre 2001

1. Before replacement, record the personalization settings to transfer to the new module (if they are available). Refer to Body Control Module (BCM) Programming/RPO Configuration .
2. Remove the right sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.



3. Remove the dash integration module (DIM) from the bracket by releasing the tab behind the module and pulling downward.
4. Disconnect the electrical connectors (1).

1. Connect the electrical connectors (1).
2. Install the DIM into the bracket.
3. Install the right sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Right Side in Instrument Panel, Gages and Console.
4. Reprogram the DIM. Refer to Body Control Module (BCM) Programming/RPO Configuration .