GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2001 🢒 LeSabre 🢒 Restraints 🢒 SIR 🢒 Console Replacement

Removal Procedure

    Object Number: 262588 Size: SH
  1. Remove the 2 front side fasteners (3) that connect the console assembly to the floor.
  2. Remove the 2 rear side fasteners (2) that connect the console assembly to the floor.
  3. Lift the console assembly (1).
  4. Disconnect the electrical connector.
  5. Remove the console assembly (1).

Installation Procedure

    Object Number: 262588 Size: SH
  1. Connect the electrical connector.
  2. Align the console assembly (1) to the floor mounting holes.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the fasteners (2,3) to the console assembly.

    4. Tighten
    Tighten the fasteners to 2 N·m (18 lb in).