Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections?

--

Go to Step 2

Go to Symptoms - Wiper/Washer Systems

1. Turn the ignition ON, with the engine OFF.
2. Turn the windshield wiper/washer switch to LO.

Do the windshield wipers stop for approximately 6 seconds and then operate for approximately 24 seconds repeatedly?

--

Go to Step 5

Go to Step 3

1. Turn OFF the windshield wiper/washer switch.
2. Disconnect the windshield wiper/washer switch connector.

Do the windshield wipers park properly?

--

Go to Step 6

Go to Step 4

Test the following circuits for a short to voltage:

Did you find and correct the condition?

B+

Go to Step 7

Go to Step 5

Replace the wiper motor. Refer to Windshield Wiper Motor Replacement .

Did you complete the replacement?

--

Go to Step 7

--

Replace the wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt.

Did you complete the replacement?

--

Go to Step 7

--

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 3