Step | Action | Yes | No |
|---|---|---|---|
1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | |
2 |
Do the windshield wipers operate properly? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the test lamp illuminate? | Go to Step 4 | Go to Step 7 |
4 | Connect a test lamp between the accessory voltage circuit and the ground circuit of the windshield wiper motor connector. Does the test lamp illuminate? | Go to Step 5 | Go to Step 8 |
5 |
Does the test lamp illuminate? | Go to Step 10 | Go to Step 6 |
6 |
Does the test lamp illuminate? | Go to Step 11 | Go to Step 9 |
7 | Repair the open in the windshield wiper motor accessory voltage circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
8 | Repair the open in the windshield wiper motor ground circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
9 | Repair the open in the windshield wiper/washer switch accessory voltage circuit. Refer to Wiring Repairs in Wiring Systems. Did you complete the repair? | Go to Step 12 | -- |
10 | Replace the windshield wiper motor. Refer to Windshield Wiper Motor Replacement . Did you complete the repair? | Go to Step 12 | -- |
11 | Replace the windshield wiper/washer switch. Refer to Multifunction, Turn Signal, and Hazard Switch Replacement - On Vehicle in Steering Wheel and Column - Tilt. Did you complete the repair? | Go to Step 12 | -- |
12 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
