GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Turn OFF the ignition.

  2. Object Number: 535633  Size: SH
  3. Raise the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  4. Drain the engine oil. Refer to Engine Oil and Oil Filter Replacement .
  5. Disconnect the electrical connector (1) from engine oil level sensor.
  6. Remove the engine oil level sensor from the oil pan.

Installation Procedure

    Notice: Refer to Component Fastener Tightening Notice in the Preface section.


    Object Number: 535633  Size: SH
  1. Install the engine oil level sensor.
  2. Tighten
    Tighten the engine oil level sensor to 20 N·m (15 lb ft).

  3. Connect the electrical connector (1).
  4. Lower the vehicle.
  5. Add the engine oil to the correct level. For the crankcase oil capacity, refer to Approximate Fluid Capacities .