Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Body Rear End Schematics | |||
1 | Did you perform the Diagnostic System Check - Body Rear End ? | Go to Step 2 | |
2 | Close the rear compartment. Does the trunk ajar indicator turn off? | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Does the scan tool display off? | Go to Step 10 | Go to Step 4 |
4 |
Does the scan tool display off? | Go to Step 7 | Go to Step 5 |
5 | Test the signal circuit of the rear compartment lid release actuator for an open or high resistance. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 6 |
6 | Inspect for poor connections at the harness connector of the rear integration module (RIM). Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 8 |
7 | Inspect for poor connections at the harness connector of the rear compartment lid release actuator. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 11 | Go to Step 9 |
8 | Replace the rear integration module (RIM). Refer to Rear Integration Body Control Module Replacement in Body Control Systems. Did you complete the replacement? | Go to Step 11 | -- |
9 | Replace the rear compartment lid release actuator. Refer to Rear Compartment Lid Latch Replacement . Did you complete the replacement? | Go to Step 11 | -- |
10 | Replace the instrument cluster. Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console. Did you complete the replacement? | Go to Step 11 | -- |
11 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
