| Table 1: | Drivers Door Module (DDM) |
| Table 2: | Instrument Panel Cluster (IPC) |
| Table 3: | Powertrain Control Module (PCM) |
| Table 4: | Rear Integration Module (RIM) |
| Table 5: | Vehicle Theft Deterrent (VTD) |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Igntion ON, Engine OFF | |||
Driver Door Cylinder Sw. | Inputs | Idle/Unlock | Idle |
Driver Door Jamb Sw. | Inputs | On/Off | Off |
Left Rear Door Jamb Sw. | Inputs | On/Off | Off |
Pass Door Cylinder Sw. | Inputs | Idle/Unlock | Idle |
Pass Door Jamb Sw. | Inputs | On/Off | Off |
Rt. Rear Door Jamb Sw. | Inputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
Security Lamp | Outputs | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
PCM/VCM in VTD Fail Enable | Engine Data 1 | Yes/No | No |
VTD Auto Learn Timer | Engine Data 1 | Active/Inactive | Inactive |
VTD Fuel Disable | Engine Data 1 | Active/Inactive | Inactive |
VTD Fuel Disable Until Ign. Off | Engine Data 1 | Yes/No | No |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition OFF, all doors and compartments closed Important: The Content Theft Deterrent System must be in the ARMED mode in order for the door jamb switch parameters in the Theft Information data list to change state. | |||
Battery Reconnect | Theft Information | On/Off | Off |
CTD State | Theft Information | Standby/Open/Ignition 1/Locked/Ignition & Door/Arm Pending/Armed/Alarm | Standby |
Driver Door Jamb Sw. | Theft Information | On/Off | Off |
Left Rear Door Jamb Sw. | Theft Information | On/Off | Off |
Pass. Door Jamb Sw. | Theft Information | On/Off | Off |
Power Mode Change | Theft Information | On/Off | Off |
Rt. Rear Door Jamb Sw. | Theft Information | On/Off | Off |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Operating Conditions: Ignition ON, Engine OFF | |||
8 Digit GM Part Number | Module Information | Numeric | Varies |
Auto Learn Timer | Data | Minutes | 0-10 |
Calibration ID | Module Information | Numeric | Varies |
Ignition Counter | Data | Counts | Varies |
Julian Date of Built | Module Information | Numeric | Varies |
Manufacturers Enable Counter | Data | Counts | 0 |
No. of Learned Key Codes | Data | Counts | 4 |
PROM ID | Module Information | Numeric | Varies |
Security Lamp Status | Inputs | On/Off | Off |
Seed and Key Timer | Data | Minutes | 0-10 |
Sarter Relay Status | Inputs | On/Off | Off |
VTD States | Inputs | Ignition Off/Normal Decision/Learn First key/Tamper/Monitor Key/Fail Enable/Learn More Keys/Seedkey Lrn Pend/Seedkey Learn/Auto Learn Pend/Auto Learn/Wakeup/No Coded Key/Check Second Key/Auto Lrn Done | Monitor Key |
Year Module Built | Module Information | Year | Varies |
