Step | Action | Yes | No |
|---|---|---|---|
Schematic Reference: Shift Lock Control Schematics Connector End View Reference: Shift Lock Control Connector End Views or Body Control System Connector End Views DEFINITION: Transmission does not shift out of PARK with the brake pedal pressed and the ignition switch in the ON position. | |||
1 | Did you perform the Automatic Transmission Shift Lock Control System Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Automatic Transmission Shift Lock Control |
2 |
Does the test lamp turn ON and OFF with the brake pedal? | Go to Step 5 | Go to Step 3 |
3 | Test the A/T shift lock solenoid supply voltage circuit for a short to voltage. Refer to Circuit Testing and Wiring Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 8 | Go to Step 4 |
4 | Inspect for poor connections at the harness connector of the automatic transmission shift lock control switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 8 | Go to Step 6 |
5 | Inspect for poor connections at the harness connections of the automatic transmission shift lock control solenoid. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. Did you find and correct the condition? | Go to Step 8 | Go to Step 7 |
6 | Replace the automatic transmission shift lock control switch. Refer to Stop Lamp Switch Replacement in Lighting Systems. Did you complete the replacement? | Go to Step 8 | -- |
7 | Replace the automatic transmission shift lock control solenoid. Refer to Automatic Transmission Shift Lock Actuator Replacement . Did you complete the replacement? | Go to Step 8 | -- |
8 | Operate the system in order to verify the repair. Did you find and correct the condition? | System OK | Go to Step 2 |
