Test Description
The numbers below refer to the step numbers on the diagnostic table.
-
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
-
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
-
The presence of DTCs which pertain to the ABS/TCS system must be diagnosed first. The specified procedure will compile all the available information before tests are performed.
-
The presence of DTCs which pertain to the transaxle must be diagnosed after any ABS/TCS codes. The specified procedure will compile all the available information before tests are performed.
Step | Action | Yes | No |
|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | Go to Scan Tool Does Not Power Up in Data Link Communications |
Does the scan tool communicate with the Powertrain Control Module and the Electronic Brake Control Module? | Go to Step 3 | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | |
Does the scan tool display any DTCs which begin with a "U"? | Go to Scan Tool Does Not Communicate with Class 2 Device in Data Link Communications | Go to Step 4 | |
Select the ABS Control Module display DTCs function on the scan tool. Does the scan tool display any DTCs? | Go to Diagnostic Trouble Code (DTC) List in Antilock Brake System | Go to Step 5 | |
Select the Powertrain Control Module display DTCs function on the scan tool. Does the scan tool display any transaxle DTCs? | Go to Diagnostic Trouble Code (DTC) List/Type in Engine Controls | Go to Step 6 | |
6 | Select the Powertrain Control Module display DTCs function on the scan tool. Does the scan tool display any DTCs? |
