For 1990-2009 cars only
Removal Procedure
- Open the front and rear doors.
- Starting at the front of the molding, pull the top edge of the rocker molding outward and away from the vehicle.
- Pull downward in order to release the molding from the vehicle.
Installation Procedure
- Install the front clip into the slot of the front fender.
- Align the moldings retainers to the holes in the side of the rocker panel, and snap the molding into place.
- Align the lower retainers to the holes in the bottom of the rocker panel, and snap the molding into place.
- Close the doors.
- Inspect the molding for proper fit.
