Removal Procedure
- Remove the windshield
wiper arms. Refer to
Windshield Wiper Arm Replacement
in Wipers/Washer Systems.
- Remove the push-in retainer caps from the air inlet grille panel.
- Remove the push-in retainers from the air inlet grille panel.
- Remove the windshield
washer hose.
- Using needle nose pliers, push the washer hose fitting into the
plenum area.
- Lift the right side of the air inlet grille panel over the wiper
arm drive spindles, and remove the panel from the vehicle.
Installation Procedure
- Install the windshield
washer hose fitting into the air inlet grill panel.
- Install the air inlet grille panel to the vehicle.
- Install the washer hose.
- Install the air inlet grille panel push-pin retainers.
- Install the caps onto the push-pin retainers.
- Install the windshield wiper arms. Refer to
Windshield Wiper Arm Replacement
in Wipers/Washer Systems.