Application | Specification | |
---|---|---|
Metric | English | |
Accelerator Cable Bracket Retaining Nuts and Bolts | 16 N·m | 12 lb ft |
Air Cleaner Upper and Lower Housing Screws | 4 N·m | 35 lb in |
Air Cleaner Intake Duct Clamp | 2 N·m | 18 lb in |
Camshaft Position (CMP) Sensor Retaining Bolt | 10 N·m | 89 lb in |
Crankshaft Position (CKP) Sensor Bolts | 30 N·m | 22 lb ft |
Exhaust Gas Recirculation (EGR) Valve Inlet Pipe Bolt | 50 N·m | 37 lb ft |
EGR Valve Inlet Pipe Stud | 50 N·m | 37 lb ft |
EGR Valve Inlet Pipe to Exhaust Manifold Bolt | 29 N·m | 21 lb ft |
EGR Valve Outlet Pipe to Inlet Pipe Nut | 29 N·m | 21 lb ft |
EGR Valve Outlet Pipe to Intake Manifold Bolt | 29 N·m | 21 lb ft |
EGR Valve Retaining Nuts | 30 N·m | 22 lb ft |
Engine Coolant Temperature (ECT) Sensor | 20 N·m | 15 lb ft |
Evaporative Emission (EVAP) Canister Bracket Nuts | 6 N·m | 53 lb in |
Evaporative Emission (EVAP) Canister Vent Valve Bolt | 6 N·m | 53 lb in |
Fuel Rail Hold Down Bolts | 10 N·m | 89 lb in |
Fuel Rail Hold-Down Nuts | 10 N·m | 89 lb in |
Fuel Sender Access Panel Bolts | 2 N·m | 18 lb in |
Fuel Tank Filler Pipe Ground Strap Screw | 9 N·m | 80 lb in |
Fuel Tank Filler Pipe Hose Clamp | 3.5 N·m | 31 lb in |
Fuel Tank Retaining Strap Bolts | 42 N·m | 31 lb ft |
Heated Oxygen Sensors (HO2S) | 41 N·m | 30 lb ft |
Idle Air Control (IAC) Valve Attaching Screws | 3 N·m | 27 lb in |
Ignition Coil to Ignition Control Module Screws | 4.5 N·m | 40 lb in |
Ignition Control Module (ICM) 14-Way Connector To Module Bolt | 2.1 N·m | 19 lb in |
In-Line Fuel Filter Outlet Nut | 30 N·m | 22 lb ft |
Intake Air Duct Clamps | 2 N·m | 18 lb in |
Knock Sensor (KS) | 19 N·m | 14 lb in |
Knock Sensor Heat Shield Bolts | 60 N·m | 44 lb ft |
Mass Air Flow (MAF) Sensor Attaching Screws | 3 N·m | 27 lb in |
Powertrain control module (PCM) harness Connector to PCM | 8 N·m | 71 lb in |
Spark Plug (Initial Installation) | 27 N·m | 20 lb ft |
Spark Plug (Reinstallation) | 15 N·m | 11 lb ft |
Throttle Body Retaining Nuts | 10 N·m | 89 lb in |
Throttle Body Support Bracket Fasteners | 10 N·m | 89 lb in |
Throttle Position (TP) Sensor Screws | 2 N·m | 18 lb in |