Instrument Panel Upper Trim Pad Replacement w/o HUD

Caution: Refer to SIR Caution in the Preface section.

1. Disable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.
2. Remove the defroster grill. Refer to Defroster Grille Replacement .



3. Remove left and right windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
4. Remove the right instrument panel (I/P) outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .
5. Remove the left I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
6. Remove the fasteners (1, 2, 3) that secure the I/P upper trim pad to the carrier.
7. Lift the pad upward in order to disengage the retainers from the I/P.
8. Disconnect the sunload sensor (4).

1. Connect the sunload sensor (4).
2. Align the I/P upper trim pad with the retainers and press down in order to engage.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the fasteners (1, 2, 3) in order to secure the I/P upper trim pad to the carrier.

Tighten
Tighten the fasteners to 2 N·m (18 lb in).

4. Install the right instrument panel (I/P) outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .
5. Install the left I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
6. Install left and right windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
7. Install the defroster grill. Refer to Defroster Grille Replacement .
8. Enable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.

Instrument Panel Upper Trim Pad Replacement with HUD

Caution: Refer to SIR Caution in the Preface section.

1. Disable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.
2. Remove the defroster grill. Refer to Defroster Grille Replacement .



3. Remove left and right windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
4. Remove the left I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
5. Remove the right I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .
6. Remove the fasteners (1, 2, 3) that secure the I/P upper trim pad to the carrier.
7. Lift the pad upward in order to disengage the retainers from the I/P.
8. Disconnect the sunload sensor (4).

1. Connect the sunload sensor (4).
2. Align the I/P upper trim pad with the retainers and press down in order to engage.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

3. Install the fasteners (1, 2, 3) in order to secure the I/P upper trim pad to the carrier.

Tighten
Tighten the fasteners to 2 N·m (18 lb in).

4. Install the right I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Right Side .
5. Install the left I/P outer trim cover. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
6. Install left and right windshield garnish moldings. Refer to Windshield Pillar Garnish Molding Replacement in Interior Trim.
7. Install the defroster grill. Refer to Defroster Grille Replacement .
8. Enable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling in SIR.