GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Lucerne 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Battery Current Sensor Replacement

Removal Procedure

    Object Number: 1669907 Size: SH
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement.
  2. Remove the tape securing the battery current sensor to the negative battery cable.
  3. Remove the battery current sensor.

Installation Procedure

    Object Number: 1669907 Size: SH
  1. Install the battery current sensor by passing the ground end of the negative cable through the sensor.
  2. Wrap electrical tape around the battery current sensor in order to secure the sensor to the negative battery cable.
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement.