Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation .
3. Remove the compartment trim panel. Refer to Rear Compartment Trim Panel Replacement .

1

Electrical Connector

2

Nuts (Qty: 2)

3

Control Module

Notice: Refer to Fastener Notice in the Preface section.

Procedure

If a replacement control module is installed, program the module. Refer to Control Module References

Tighten
9 N·m (80 lb in)