GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2006 🢒 Lucerne 🢒 Body 🢒 Instrument Panel, Gages, and Console 🢒 Automatic Transmission Range Selector Cable Replacement - Column

Removal Procedure
  1. Set the park brake and chock the wheels.

    2. Object Number: 599655 Size: SH
  2. Disconnect the transaxle range selector cable terminal (1) from the transaxle manual shift lever pin.
  3. Press the locking tabs inward in order to release the transaxle range selector cable (2) from the bracket.
  4. Remove the left instrument panel (I/P) closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .

    5. Object Number: 161141 Size: SH
  5. Remove the retaining clip from the range selector cable.
  6. Remove the range selector cable from the column control lever.

    7. Object Number: 161140 Size: SH
  7. Remove the range selector cable from the steering column bracket.
  8. Remove the range selector cable through the hole in the cowl.

Installation Procedure

    Object Number: 161144 Size: SH
  1. Properly route the range selector cable through the engine compartment.
  2. Install the range selector cable through the cowl.

    3. Object Number: 161140 Size: SH
  3. Install the range selector cable to the steering column bracket.

    4. Object Number: 161141 Size: SH
  4. Install the retaining clip to the range selector cable.
  5. Install the range selector cable to the column control lever.
  6. Install the left I/P closeout/insulator panel. Refer to Instrument Panel Insulator Panel Replacement - Left Side .

    7. Object Number: 599655 Size: SH
  7. Install the transaxle range selector cable (2) into the bracket.
  8. Connect the transaxle range selector cable terminal (1) to the transaxle manual shift lever pin.
  9. Adjust the range selector cable. Refer to Range Selector Lever Cable Adjustment .