Caution: Refer to SIR Caution in the Preface section.

Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger presence system to operate improperly.

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling and SIR Disabling and Enabling .
2. Remove the front seat. Refer to Driver and Passenger Seat Replacement .
3. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is removed. Refer to Passenger Presence System Programming and Setup .

1

Seat Cushion Cover

Tip

1. Disconnect the seat cover J-channel from the seat cushion frame.
2. Disconnect the heated seat electrical connector, if equipped.
3. Remove the seat cushion cover and pad as an assembly from the seat cushion frame.

2

Seat Cushion Pad