GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Lucerne 🢒 Engine 🢒 Engine Electrical 🢒 Engine Ground Strap Replacement

Engine Ground Strap Replacement RPO LD8

Removal Procedure

    Object Number: 1662856 Size: SH
  1. Remove the fuel injector sight shield, if necessary. Refer to Fuel Injector Sight Shield Replacement .
  2. Remove the ignition control module (ICM) ground strap bolt (3) from the cylinder head.
  3. Loosen the ICM ground strap bolt (1) from the camshaft cover.
  4. Remove the ICM ground strap (2).

    5. Object Number: 1662923 Size: SH
  5. Remove the ICM ground strap bolt (3) from the cylinder head.
  6. Loosen the ICM ground strap bolt (1) from the camshaft cover.
  7. Remove the ICM ground strap (2).

Installation Procedure

    Object Number: 1662923 Size: SH
  1. Install the ICM ground strap (2).

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Tighten the ICM ground strap bolt (1) to the camshaft cover.

    3. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  3. Install the ICM ground strap bolt (3) to the cylinder head.

    4. Tighten
    Tighten the bolt to 25 N·m (18 lb ft).


    Object Number: 1662856 Size: SH
  4. Install the ICM ground strap (2).
  5. Tighten the ICM ground strap bolt (1) to the camshaft cover.

    6. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  6. Install the ICM ground strap bolt (3) to the cylinder head.

    7. Tighten
    Tighten the bolt to 10 N·m (89 lb in).

  7. Install the fuel injector sight shield, if necessary. Refer to Fuel Injector Sight Shield Replacement .