GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Lucerne 🢒 Engine 🢒 Engine Mechanical - 3.8L 🢒 Engine Mount Strut Engine Side Bracket Replacement

Removal Procedure

    Object Number: 1685526 Size: SH
  1. Remove the ignition control module. Refer to Ignition Control Module Replacement .
  2. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .
  3. Remove the engine mount strut bracket nuts (1).
  4. Remove the engine mount strut bracket stud (3).
  5. Remove the engine mount strut bracket from the studs.

Installation Procedure

    Object Number: 1685526 Size: SH
  1. Install the engine mount strut bracket to the studs.
  2. Install the engine mount strut bracket stud (3).

    3. Notice: Refer to Fastener Notice in the Preface section.

  3. Install the engine mount strut bracket nuts (1).

    4. Tighten
    Tighten the stud/nuts to 50 N·m (37 lb ft).

  4. Install the engine mount strut. Refer to Engine Mount Strut Replacement .
  5. Install the ignition control module. Refer to Ignition Control Module Replacement .