Tools Required

J 35354-A Seal Installer

1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .

Important: Use care to avoid damaging the crankshaft front oil seal bore or the crankshaft front oil seal contact surfaces.

2. Pry out the crankshaft front oil seal with a flat-bladed tool such as a large screwdriver.
3. Inspect the crankshaft balancer and engine front cover for scratches.

1. Install the crankshaft front oil seal in the engine front cover using the J 35354-A .
2. Tighten the bolt until the crankshaft front oil seal is seated in the engine front cover.
3. Remove the J 35354-A .
4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .
5. Inspect for leaks.