GM Service Manual Online
For 1990-2009 cars only

Tools Required

    • J 45059 Torque Angle Meter
    • J 37096 Flywheel Holder

Removal Procedure


    Object Number: 309963  Size: SH
  1. Remove the transaxle. Refer to Transmission Replacement .
  2. Install the J 37096 to a ratchet.
  3. Install the J 37096 and ratchet to the flywheel to hold the flywheel.

  4. Object Number: 153602  Size: SH
  5. Loosen the flywheel bolts.
  6. Remove 7 of the 8 engine flywheel bolts, leaving 1 bolt at the top of the crankshaft rotation.
  7. Firmly grasp the engine flywheel and remove the remaining bolt. Do not drop the engine flywheel when removing the final bolt.
  8. Remove the flywheel.

Installation Procedure


    Object Number: 153602  Size: SH
  1. Install the flywheel.
  2. Install NEW flywheel bolts until snug.
  3. Install the J 37096 and ratchet to the flywheel to hold the flywheel.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Tighten the flywheel bolts.
  6. Tighten
    Tighten the bolts to 15 N·m (11 lb ft) plus an additional 50 degrees using J 45059 .

  7. Install the transaxle. Refer to Transmission Replacement .