Removal Procedure
- Remove the passenger side quarter trim panel. Refer to
Quarter Upper Trim Panel Replacement.
- Disconnect the electrical wiring and coaxial cables (1, 4, 5) from the TV antenna module (3).
- Remove the TV antenna module fasteners (2).
- Remove the TV antenna module (3) from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the TV antenna module (3) and fasteners (2).
Tighten
Tighten the TV antenna module (3) fasteners (2) to 9 N·m (80 lb in).
- Connect the electrical wiring and coaxial cables (1, 4, 5) to the TV antenna module (3).
- Install the passenger side quarter trim panel. Refer to
Quarter Upper Trim Panel Replacement.