GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2007 🢒 Lucerne 🢒 Body Systems 🢒 Lighting 🢒 Stop Lamp Switch Replacement

Removal Procedure

    Object Number: 575743 Size: SH
  1. Remove the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Rotate the stop lamp/ABS/shift lock switch (2) counterclockwise, then pull to remove the switch.
  3. Disconnect the electrical connector from the switch.

Installation Procedure

    Important: The stop lamp switch is self adjusting when installed properly in the fully locked position. The twist lock type switch requires no further adjustment.

  1. Install the stop lamp switch into the retainer.

    2. Object Number: 575743 Size: SH
  2. Press the switch (2) into the retainer until the switch plunger is fully depressed into the switch barrel.
  3. Rotate the switch (2) clockwise until travel has stopped and the switch locks fully into position.
  4. Connect the stop lamp/ABS/shift lock switch electrical connector to the stop lamp switch (2).
  5. Adjust the stop lamp switch. Refer to Stop Lamp Switch Adjustment .
  6. Install sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .