Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedure

1. Position the window approximately halfway down in the door.
2. Remove the trim panel. Refer to Front Side Door Trim Panel Replacement .
3. Remove the water deflector. Refer to Front Side Door Water Deflector Replacement .
4. Remove the front door window. Refer to Front Side Door Window Replacement .

1

Front Door Window Regulator Bolts (Qty: 3)

Tighten
10 N·m (89 lb in)

2

Front Door Window Regulator Screw (Qty: 2)

Tighten
10 N·m (89 lb in)

3

Front Door Window Regulator

Procedure

1. Disconnect the electrical connector.
2. Rotate the regulator as necessary to remove from the door.
3. Inspect the window for proper operation and programming. Refer to Window Regulator Motor Programming and Setup .